Cut to Length Line Specifications
CTL-01
Manufacturer: Delta Brand / Automatic Feed
Min Gauge: 0.020
Max Gauge: 0.100
Line Speed – FPM: 300
Shear Speed – SPM: 18 to 60
Surface Quality: Class 1 / 2
Products
Cold Roll
Galvanized
Hot Roll PO
Galvanneal
Electro-Galvanized Zinc/ Alloy
Entry End
Min ID: 24
Max ID: 24
Min OD: 36
Max OD: 80
Min Width: 9,8
Max Width: 72.5
Max Weight: 72,000
Winding: O/U
Reel Type: Dual Cones
Exit End
Min Length: 6 – but <30 long, width must be > 16
Max Length: 157
Length Tolerance: 0.015
Min Width: 9.75
Max Width: 72.5
Max Weight: 20,000
Pallet Turner
No
Blank Types
Rectangles: Yes
Squares: Yes
Parallelograms: Yes
1 or 2-sided Trapezoids: Yes
Scallop: Yes
Sweep: 25, 32, 43.5 Degree
Chevron: No
Angle Capability: (+/-) 25 Degrees Max
Leveler: 19 roll / 6 high
Edge Trimming
Min Edge Trim: No Edge Trim
Max Edge Trim: No Edge Trim
Stackers
Max Stack Height: 24″/ with 8″ skid
Stacker Feed: Magnetic
Oiling
Oiling: 2-side ultrasonic
Oiling Capability: + / – 40 mg/ft
Oil Types: Quaker FERROCOTE® 61 MAL HCL 1, Quaker FERROCOTE® 61 A US, Fuchs METALUB PL 7105 A, Daubert Cool Form 4901
Oil Measurement Equipment: Infralytic, P-Fund
Thickness Gauge: Yes
Dry Capability: Yes
Inspection Area: Halogen Lights
Two-Side or One-Side Inspection: One-Side
Wash Section: No Wash
Dryer: No Wash
Leveler:
CTL-02
Manufacturer: Automatic Feed
Min Gauge: 0.020
Max Gauge: 0.100
Line Speed – FPM: 300
Shear Speed – SPM: 12 to 60
Surface Quality: Class 1 / 2
Products
Cold Roll
Galvanized
Galvanneal
Electro-Galvanized Zinc/ Alloy
Aluminized
Hot Roll PO
Entry End
Min ID: 24
Max ID: 24
Min OD: 36
Max OD: 84
Min Width: 18
Max Width: 72.8
Max Weight: 75,000
Winding: O/U
Reel Type: Dual Snubber Cones
Exit End
Min Length: 16
Max Length: 168
Length Tolerance: 0.015
Min Width: 18
Max Width: 72.5
Max Weight: 20,000
Pallet Turner
No
Blank Types
Rectangles: Yes
Squares: Yes
Parallelograms: Yes
1 or 2-sided Trapezoids: Yes
Scallop: Yes
Sweep: 25, 32, 43.5 Degree
Chevron: No
Angle Capability: (+/-) 30 Degrees Max
Leveler: 19 roll / 6 high
Edge Trimming
Min Edge Trim: 1/4″ per side
Max Edge Trim: 2″ per side
Stackers
Max Stack Height: 23.5″/ with 8″ skid
Stacker Feed: Magnetic
Oiling
Oiling: 2-side electrostatic
Oiling Capability: + / – 40 mg/ft
Oil Types: Quaker FERROCOTE® 61 MAL HCL 1, Quaker FERROCOTE® 61 A US, Fuchs METALUB PL 7105 A, Daubert Cool Form 4901
Oil Measurement Equipment: Infralytic, P-Fund
Thickness Gauge: Yes
Dry Capability: Yes
Inspection Area: Strobe
Two-Side or One-Side Inspection: Two-Side
Wash Section: High-Pressure Hot Water
Dryer: Forced Air
Leveler: